MC3362
LOW POWER NARROWBAND FM RECEIVER
Includes dual FM conversion with oscillators, mixers, quadrature
detector and meter drive/carrier detect circuitry. The MC3362 also has
buffered first and second local oscillator outputs and a comparator circuit
for FSK detection.The MC3362 offer the following features:
- Width Input Bandwidh:
200MHz using Internal Local Oscillator
450MHz using External local Oscillator
- Complete Dual Convercion Circuitry
- Low Voltage: Vcc=2...7 Vdc
- Low Drain Current: 3,6mA Typ @ Vcc=3Vdc
- Excellent Sensitivity; Input 0,7mkV Typ for 12dB SINAD
- Data Shaping Comparator
- Received Signal Strength Indicator (RSSI) with 60dB Dynamic Range
- Low Number of External Parts Required
MAXIMUM RATING (Ta=25C, unless otherwise noted)
Power Supply Voltage Pin6 Vcc=8Vdc
Operating Supply Voltage Range Pin6 Vcc=2...7Vdc
Input Voltage (Vcc+5Vdc) Pin1,24 1Vrms
Junction Temperature Tj=150C
Operating Ambient Temperature Range Ta=-40...+85C
ELECTRICAL CHARACTERISTICS
(Vcc=5Vdc, Fo=49,7MHz, Deviation=3kHz, Ta=25C)
Drain Current (Carrier Detect Low) Pin6 4,5mA 7mA max
Input for -3dB Limiting 0,7mkVrms 2,0Vmax
Recovered Audio (RF signal level=10mV) Pin13 350mVrms
Noise Output (RF signal level=0mV) 250mVrms
Carrier Detector Threshold (below Vcc) Pin10 0,64Vdc
Meter Drive Slope Pin10 100nA/dB
Input for 20 dB (S+N/N) 0,7mkVrms
First Mixer 3rd Order Interception (Input) -22dBm
First Mixer Input Resistance 680 Ohm
First Mixer Input Capacitance 7,2pF
First Mixer Convertion Voltage Gain 18dB
Second Mixer Conversion Voltage Gain 21dB
Detector Output Resistance Pin13 1,4k